This mode is used to create lists of parts. Other Items allows the user to scan in parts, and add them to the DMS without having an order bucket.
Using Other Items
Step 1. At the Main Menu, press 3 and then Enter to go into the Misc Menu.
Step 2. At the Misc Menu, press 1 and then Enter.
Step 3. You will be prompted for a Batch #, enter any alpha-numeric value you would like.
Step 4. You will then be prompted for a Part #, scan the barcode for the part, or type the part number using the on-screen keyboard and press Enter.
NOTE: When typing the part number, special characters (such as !, #, -, spaces, etc.) are not needed.
Step 5. If you would like to change the Batch # to start a new part list, go into Hot Keys and then Change Batch #.
Step 1. Press the HOT KEY button to get to the Hot Key Menu.
Step 2. Select one of the following options:
• Change Batch #
• Print Label
• Set Bin
• Turn Print Mode ON
• Turn Single Mode ON
Change Batch #
Change the Batch # for future parts scanned.
Will bring up a list of labels that can be printed, and will print the selected label.
Change the bin location for the last part scanned.
Turn Print Mode On
Print a label for each part scanned. See Print Mode.
Turn Single Mode On
Enters a quantity of 1 for each part scanned. See Single Mode.