Create Part List

This mode is used to create lists of parts that can be viewed using the Print Part List Report through ScanIt Parts on the computer.

Using Create Part List

Step 1. At the Main Menu, press 3 and then Enter to go into the Misc Menu.  



Step 2. At the Misc Menu, press 2 and then Enter.



Step 3. You will be prompted for a Batch #, enter any alpha-numeric value you would like.



Step 4. You will then be prompted for a Part #, scan the barcode for the part, or type the part number using the on-screen keyboard and press Enter.
NOTE: When typing the part number, special characters (such as !, #, -, spaces, etc.) are not needed. 

Step 5. If you would like to change the Batch # to start a new part list, go into Hot Keys and then Change Batch #.


Hot Keys

Step 1. Press the HOT KEY button to get to the Hot Key Menu.

Step 2. Select one of the following options:

          • Print Label

          • Change Batch #

          • Turn Print Mode ON



Print Label

Will bring up a list of labels that can be printed, and will print the selected label.

Change Batch #

Change the Batch # for future parts scanned.

Turn Print Mode On

Print a label for each part scanned. See Print Mode.