Over / Shorts

This report compares quantity shipped to quantity scanned.  If the two quantities do not match, the report will show the part # as an overage or a shortage.

 

Important: This report should be run on a daily basis.

 

 

Step 1.          Select from one of the following:

Date - enter the scanned date(s)

Note:  You must select a Group By choice.

Shipment # - enter the shipment number

Control # - enter the control number

Note:  Last 30 days - displays only the parts scanned on the control number entered within the last 30 days.

Display All Parts - displays all scanned parts

 

 

Example