Chapter 7: Manual

The Manual Posting feature is used to post parts manually or fix scanning errors.  This feature also allows for posting of parts directly into your DMS.

 

Step 1. Select Manual from the Main Menu.

 

Step 2. The Manual Posting screen displays the Open Orders tab by default.

 

 

Open Orders

This screen allows you to manually post bin changes.

 

Step 1. Enter the Part #.

 

Note: If the part number is not found, the message “Part # XXXXXXXX was not found” is displayed.

 

Step 2. The Control # field will fill automatically, or select the correct control # from the drop-down menu.
 

Step 3. The Shipper # field will fill automatically, or select the correct shipper # from the drop-down menu.
 

Step 4. The Make field will fill automatically.
 

Step 5. Enter the quantity to post.
 

Step 6. Select Post to post the part number.
 

Step 7. Select Clear to delete all of the information entered on the form, and start over.
 

Step 8. Select Close.

 

 

Bin Changes

This screen allows you to manually post bin changes.

 

Step 1. Select the Bin Changes tab.
 

Step 2. Enter the Part #.

 

Note: If the part number is not found, the message “Part # XXXXXXXX was not found” is displayed.

 

Step 3. Enter the Make or Old Bin number.

Note: If the bin number entered is not found, the message “Bin not found” is displayed.

 

Step 4. Enter the New Bin number.

Note: If the bin number entered is not found, the message “Bin not found” is displayed.

 

Step 5. Select Post to post the bin change.
 

Step 6. Select Clear to delete all of the information entered on the form, and start over.
 

Step 7. Select Close.

 

 

Batch Bin Changes

This screen allows you to post a batch of bin number changes.

 

Step 1. Select the Batch Bin Change tab.
 

Step 2. Enter the bin number you are changing in the Old Bin field.

 

Note: If the bin number entered is not found, the message “Bin not found” is displayed.

 

Step 3. Enter the new bin number in the New Bin field.

Note: If the bin number entered is not found, the message “Bin not found” is displayed.

 

Step 4. Select Post to post the bin change.
 

Step 5. Select Clear to delete all of the information entered on the form, and start over.
 

Step 6. Select Close.