Perpetual Inventory

Perpetual Inventory allows you to maintain and count inventory by bin location.

 

Step 1.          From the Main Menu select 4 (Perpetual Inventory).
 

 

Step 2.  Enter a bin location.

 

Note:  Bin selection can be exact or partial.

 

Example: T100-1 or T100.  In the second selection any part that is in the T100 area will be noted as the correct bin.  If you select T100-A then any part you scan that is not exactly in T100-A will be reported as the wrong bin.

 

Step 3.          Begin scanning or entering part numbers.

The default quantity is 1.

If the part is in the wrong bin, the scanner will alert the operator with a message on the screen.

Note:  When typing part numbers manually in the scanner, dashes, spaces, # signs, and special characters are not used.

 

 

Hot Keys – Perpetual Inventory

 

 

 

Print Label

Step 1.   Select the Hot Key button.

 

Step 2.  Select the Print Label button and choose which label to print.

 

 

Change Bin Location

Step 1.  Select the Hot Key button.

 

Step 2.  Select the Change Bin Location button and enter the next bin location.

 

 

Turn Print Mode ON

Note:  Automatically prints labels during scanning

 

Step 1.  Select the Hot Key button.

 

Step 2.  Select the Turn Print Mode ON button to print labels during the scanning process.

 

 

Enter Quantity

Note:  The quantity entered REPLACES the total quantity scanned.

 

Step 1.  Select the Hot Key button.

 

Step 2.  Select the Enter Quantity button and enter the correct quantity.

 

 

Set New Bin Location

Step 1.  Select the Hot Key button.

 

Step 2.  Select Set New Bin Location.

 

 

Step 3.  The scanner will display your current bin location as the new bin location.

 

Step 4.  Enter Y (Yes) to accept or N (No).

 

Note:  See Bin Changes for more detailed information.