How Pull Parts Works
What Pull Parts Does
Sometimes a set of parts has to come off the shelves. For example, parts going back to a vendor. Pull Parts lets you build that list on the website, with a quantity for every part, and group it into a batch.
The scanner sees the batch. Your person opens it, walks the bins, and scans each part as it comes off the shelf. They can print a Pulled label, and mark a part Partial Fill or Not Found when the shelf comes up short, the same way they would in PickIt. You watch the progress on the website and close the batch when it is done.
Pull Parts arrived with scanner version 130 in November 2026. Using it is up to you; nothing changes until someone builds a batch.
Pull Parts is tracking only. It records what was pulled, who pulled it and when. It does not post anything to your DMS and does not change on-hand quantities or bins there. Any adjustment for the parts that leave is still made in your DMS.
Who Can Use It
On the website, Pull Parts is in the ScanIt Parts menu, right after Parts List. On the scanner it is a Pull Parts tile in the main menu. There are three permissions:
- Pull Parts (website) — opens the Pull Parts pages, so the user can build batches and follow them.
- Pull Parts Verify — lets a manager Unlock, Send back, Close, Reopen and Delete batches.
- Pull Parts (scanner) — shows the tile on the scanner.
You may not need to do anything. Everyone who already had Parts List was given both website permissions, and everyone with the scanner Create Part List permission was given the scanner one. There is no separate setting to switch Pull Parts on.
Building a Batch
Go to Pull Parts on the website and click New batch. It asks for two things:
- Batch # — up to 20 characters. You choose it; it is not numbered for you. It is saved in upper case and has to be unique in your store, closed batches included. A number already used gets “Batch # … is already in use.”
- Description — what the batch is for, so the next person knows.
Then you add the parts on the next screen. There are three ways to do it, and you can mix them on one batch.
Type Them In
Fill in Part #, Make (optional) and Qty, then click Add part. If the part exists under more than one make, you are asked to choose a make. A part already on the batch is refused, so you change its quantity instead.
Import a File
Click Import parts and choose CSV / Excel file. CSV, TXT, XLS and XLSX files are accepted, up to 12 MB and 5,000 rows.
Your file does not need special column names. You tell the screen which column holds the Part #, and optionally which hold the Qty and the Make. A row with no quantity counts as 1. Use the File has a header row switch if the first row is column titles.
Use Part List Batches
Already scanned the parts with Parts List? Click Import parts, choose Part List batches, pick a Category, and tick the batches you want. Each one shows its part count, date range and who scanned it. The quantity scanned on each Part List line becomes the quantity to pull. A Part List batch you have used before carries an Already converted into … badge so you do not pull it twice by accident.
Importing adds, it does not replace. A part already on the batch has the imported quantity added to it, and a part that appears twice in what you import is combined into one line.
What the Import Checks
- Bad rows are skipped, and you are told first. A row with a blank part # or a quantity that is not a whole number above zero is left out. The screen shows how many rows were skipped and you confirm before anything is imported.
- Parts under several makes need a make chosen for each before the import goes ahead.
- Parts not in your inventory are still added. They show Not in inventory on the line, so you can see them and decide.
You never enter bins. The bins shown for each line come from your ScanIt Parts inventory as it stands now.
Changing the Batch
While a batch is Open you can change a line’s requested quantity or remove a line. A quantity cannot go below what has already been pulled, and a line with pulled parts cannot be removed. Once the batch leaves Open, its parts are fixed.
Pulling on the Scanner
Open Pull Parts on the scanner. You see the batches waiting to be pulled, in Batch # order, each with its pulled count, parts and pieces. Type a Batch # into Search Batches to find one quickly. A batch with no parts on it is not listed.
Tap a batch to open it. That locks it to you, so nobody else pulls the same batch at the same time. The parts are listed in walk order, sorted by bin, with parts that have no bin at the end. Each line shows the bin, the old part # and how many are pulled out of how many requested.
- Scan or type the part #. Your dealer lookup barcodes work here too. If the part is on the batch under more than one make, the scanner asks which make.
- Enter the quantity. Turn on Single in the bottom bar to record one piece per scan without being asked.
When the Scanner Turns a Scan Down
Each scan is checked against the batch, and the scanner tells you plainly what is wrong:
- “Part # … is not on this batch.”
- “Part # … has already been pulled.”
- “Only 2 remaining.” — when you try to pull more than was asked for.
An old or superseded part number does not count as a match. Scan the number that is on the batch.
Fixing a Miscount
Tap a line to open Part Details. The Quantity Pulled stepper lets you set the count up or down, then Save.
Partial Fill and Not Found
When the shelf does not have everything, flag the line from Part Details:
- Partial Fill — saves what you pulled and marks the rest short.
- Not Found — marks the part as not on the shelf.
Either way you can add a Note for the manager before you tap Flag. On the website, a partial fill shows as Short and is shaded amber, and a not-found part shows as Not found and is shaded red. If the part turns up later, pulling it clears the flag.
Printing the Pulled Label
Pull Parts has its own two labels, set up on the website under Settings → Labels, in the Pull Parts section:
- Part # Barcode — the barcode, part #, bin, old part #, group and description.
- Pulled slip — prints the word PULLED, the part #, the batch #, who pulled it, and the date and time.
Turn on Auto-Print in the bottom bar and the Pulled slip prints after each pull, one label per piece. It needs a printer that is set up and turned on. You can also print from Print Label in Part Details, and reprint earlier labels from the print history at the top of the screen.
Stores that already had labels were given these two. If the scanner says “That label isn’t set up for Pull Parts. Check Settings > Labels on the website.”, open that page and look at the Pull Parts section.
Finishing a Batch on the Scanner
Tap Complete when you are done. If parts are still pending, the scanner asks whether to complete anyway; pending parts stay unpulled for the manager to review. Choose Keep Pulling to go back. When every line is pulled or flagged, the batch completes by itself.
Need to stop partway? Tap Switch Batch. The batch is released with every count kept, and anyone with the permission can pick it up again later.
Batch Statuses
- Open — being built, or waiting to be pulled. The only status where parts can be added or changed.
- Pulling — a scanner has it open and locked.
- Pulled — the scanner completed it. Waiting for a manager.
- Closed — finished. Nobody can add, change or pull parts on it, and it no longer shows on the scanner.
Each line has its own status too: Pending, Pulled, Short or Not found.
Following Along on the Website
The Pull Parts list shows every batch that is not closed, with its status, lines, pulled count, exceptions and who has it locked. The filter switches to all batches or one status.
Open a batch to see “N of M parts pulled”, a progress bar and an exceptions count. The page updates every few seconds while the batch is Open or Pulling. Search by part # or description, or turn on Exceptions only to see just the short and not-found lines. Each line shows who last pulled it and when, with a Typed badge if the part # was typed instead of scanned. The Activity panel lists every event on the batch.
Manager Actions
With the Pull Parts Verify permission:
- Unlock — frees a batch someone left locked. Their scanner is told it was unlocked, and the counts are kept.
- Send back — reopens a Pulled batch and puts short and not-found lines back to pending, so they can be tried again.
- Close batch — marks it finished. The confirmation shows the pulled, short and not-found counts, and warns you about any lines never pulled.
- Reopen — brings a closed batch back.
- Delete — only for an Open batch with nothing pulled.
Packing List and Exports
From the batch list, choose Download packing list for a PDF of the batch: make, part #, requested, pulled, how it was entered, status and note, with the exceptions listed first on a Pulled batch. It reads VERIFIED once the batch is closed and NOT VERIFIED before that. The batch page also exports to Excel, CSV and PDF.
Troubleshooting
Pull Parts Is Not on the Scanner
Check that the user has the scanner Pull Parts permission, and that the scanner is on version 130 or later.
A Batch Is Missing From the Scanner
The scanner only lists batches that have parts on them and are Open, plus any batch you have locked. A batch someone else is pulling stays off your list until they tap Switch Batch or a manager uses Unlock; the website shows who has it locked and since when. A Pulled or Closed batch is not offered until a manager sends it back or reopens it.
The Scanner Lost Its Connection
Every scan is checked with the server as it happens, so pulling needs a wireless connection. If it drops, the scanner shows the network banner; get back in range and carry on.
Putting It to Work
- Click New batch and give it a Batch # and a description that says what it is for.
- Add the parts by typing, importing a file, or using Part List batches.
- Check the Pull Parts labels under Settings → Labels.
- On the scanner, open the batch, turn on Auto-Print, and pull in walk order.
- Flag anything short or not found, with a note, and tap Complete.
- Review the exceptions on the website, close the batch, and download the packing list.
Related Resources
Ready to See ScanIt Parts in Action?
Schedule a personalized demo and see how ScanIt Parts can transform your parts department.
Request a Demo